How solar control glass coatings work

septembre 21, 2026
blog

Solar control glass reduces the amount of heat and UV radiation that passes through a window, without blocking natural light. It is used in buildings, vehicles and optical applications where heat build-up is a problem. This article explains how the coatings work, which types exist and where they are applied.

What is solar control glass?

Solar control glass is glass that has been treated or coated to reduce solar heat gain. Without any coating, standard glass lets through a large portion of the infrared radiation in sunlight. This heats up the interior of a building or vehicle, which increases cooling costs and reduces comfort.

Solar control coatings change how the glass handles incoming solar energy. They can reflect, absorb or filter specific parts of the solar spectrum, particularly the near-infrared range between 700 and 2500 nm, while keeping visible light transmittance as high as possible.

The solar factor measures how much of the incoming solar energy ends up inside a building. It is also called the g-value or Solar Heat Gain Coefficient (SHGC). This includes energy that passes straight through the glass and energy that the glass absorbs and releases inward. The scale runs from 0 to 1. A lower SHGC means less solar energy enters the space. Solar control glass typically has an SHGC between 0.2 and 0.5, compared to 0.85 or higher for standard uncoated glass.

What do U-value and SHGC mean?

Two values describe how a glass unit handles heat. The U-value measures how easily heat passes through the glass because of the temperature difference between inside and outside. It is expressed in W/m²K, and a lower U-value means better insulation.

The SHGC measures solar heat, so it says nothing about insulation. According to the Whole Building Design Guide, a glass unit with an SHGC of 0.6 lets in twice as much solar heat as one with an SHGC of 0.3.

Solar control coatings mainly lower the SHGC. Low-e coatings also lower the U-value. Which value matters most depends on the climate, as the section on low emissivity glass explains.

How solar control coatings are applied

Solar control coatings are applied to the glass surface using two main methods: hard coat and soft coat.

Hard coat coatings are applied during glass production, while the glass is still hot. The coating bonds directly to the glass surface and is highly durable. Hard coat glass can be used as single pane glass and handled without special care.

Soft coat coatings are applied after the glass has cooled, using a vacuum deposition process. They offer better thermal performance and lower emissivity than hard coat options, but are more sensitive and need to be protected inside an insulated glass unit. Most high-performance low emissivity glass uses a soft coat process.

Solar control glass information card

Low emissivity glass and solar control

Low emissivity glass, also known as low-e glass, is one of the most common types of solar control glazing. A low-e coating reduces the amount of infrared radiation that passes through the glass, which reduces heat transfer between inside and outside.

Low-e coatings work differently depending on the climate. In cold climates, low-e glass is designed to let in solar heat, while keeping interior heat from escaping. In hot climates, the priority is blocking solar heat gain while keeping the interior cool. Solar control low-e coatings are optimised for hot climates and high solar radiation environments.

Low e glass coating can be combined with other coatings to create dual reflective glass, which has different reflective properties on each side. This reduces glare while keeping visible light transmittance high.

Infrared absorbing nanoparticles in solar control glass

One approach to solar control coatings uses infrared absorbing nanoparticles dispersed in a thin film applied to the glass surface. Instead of reflecting near-infrared radiation, the nanoparticles absorb it and dissipate it as heat within the coating layer.

This approach has advantages for applications where reflection is undesirable. On a building facade, reflecting heat back toward people on the street is not always practical. An absorbing coating handles the heat within the glass itself.

Lanthanum hexaboride (LaB₆) nanoparticles absorb strongly in the 800 – 1400 nm near-infrared range at very low doses, between 10 and 100 mg per square metre. The coating stays visually transparent with only a slight greenish tint, because the absorption occurs in the infrared range, not the visible range. For more on how LaB₆ nanoparticles work as an infrared absorber, visit our LaB₆ nanoparticles page.

UV protection in solar control glass

Solar control glass also reduces UV transmission. UV radiation causes fading of furniture, flooring and textiles. Most solar control coatings block a significant portion of UV radiation, typically below 380 nm, while keeping visible light coming through.

This is particularly relevant in commercial buildings with large glazed facades, where interior materials are exposed to prolonged sun exposure. Solar control window film applied to existing glass is a cost-effective way to add UV protection without replacing the glass.

Where solar control glass is used

Buildings and architecture

Solar control glazing is standard in commercial buildings with large glass facades. It reduces cooling costs in hot climates and improves comfort near windows. Double glazed units with a solar control low-e coating on one of the inner surfaces are the most common solution in new construction.

Automotive glass

In vehicles, solar control coatings reduce heat build-up inside the cabin without darkening the windows. Automotive solar control window film is also widely used as an aftermarket solution for side and rear windows.

Insulated glass units

In insulated glass units, the solar control coating is placed on one of the inner glass surfaces, where it is protected from the outside environment. The position of the coating within the unit affects its thermal performance and SHGC.

Industrial and optical applications

Solar control coatings are also used on optical components, sensors and industrial glass where controlling which wavelengths pass through matters for the performance of the system.

Frequently asked questions about solar control glass

What is the difference between solar control glass and low emissivity glass?

Low emissivity glass reduces heat transfer by lowering thermal radiation through the glass. Solar control glass goes further by also reducing solar heat gain from incoming sunlight. Many products combine both functions in a single coating.

Does solar control glass reduce natural light?

Solar control coatings are designed to keep visible light transmittance as high as possible while blocking heat and UV. Some reduction in light is unavoidable, but modern coatings can block most solar heat gain with a visible light transmittance above 60%.

What is the SHGC?

The SHGC, also called the solar factor or g-value, measures how much of the incoming solar energy ends up inside a building. An SHGC of 0.3 means 30% of the solar energy enters the space. The lower the SHGC, the better the heat control.

Can solar control window film be applied to existing glass?

Yes. Solar control window film is a cost-effective way to add solar control properties to existing glass without replacing it. It is often used when retrofitting older buildings and vehicles.

Is solar control glass the same as tinted glass?

No. Tinted glass reduces visible light transmittance by adding colour to the glass itself. Solar control glass uses a coating to selectively block infrared and UV radiation while keeping natural light transmittance higher than tinted glass.

How does solar control glass perform in cold climates?

In cold climates, solar control glass needs to balance blocking summer heat while allowing passive solar gain in winter. Selective solar control coatings with a moderate SHGC are often used, combined with a low-e coating to reduce heat loss in winter.

Summary

Solar control glass reduces solar heat gain, UV radiation and thermal discomfort without blocking natural light. Coatings are applied as hard coat or soft coat, with soft coat low-e coatings offering the best thermal performance. Infrared absorbing nanoparticles like LaB₆ offer an alternative approach for applications where reflection is not practical. Solar control glazing is used in buildings, vehicles and insulated glass units across hot and cold climates.

What is a UV resistant clear coat?

A clear coat protects the layers underneath it, while it takes the full impact of…

Lire la suite

Benzotriazole vs triazine UV absorbers explained

A UV absorber protects coatings and plastics from the physical degradation caused by long term…

Lire la suite

Environmental impact of nanomaterials and green nanotechnology

Nanomaterials are used across medicine, electronics, coatings and energy. Their small size and high surface…

Lire la suite

Nanoparticle synthesis methods and applications

Nanoparticles are particles between 1 and 100 nanometres in size. At this scale, materials behave…

Lire la suite

How automotive and industrial glass coatings work

Glass coatings protect surfaces from water, road debris, heat and scratches. In automotive applications, the…

Lire la suite

How does particle size affect nanoparticle ink performance?

In a nanoparticle ink, particle size is not just a physical measurement. It affects how…

Lire la suite

What are metal boride nanoparticles?

Metal boride nanoparticles explained Metal borides are compounds of a metal and boron. At the…

Lire la suite

How do infrared reflective and infrared absorbing coatings work?

Not all coatings that block heat work the same way. Some reflect infrared radiation back…

Lire la suite

What is an infrared absorbing nanoparticle?

Sunlight contains more than visible light. Around 50% of the energy in sunlight reaches us…

Lire la suite

The main types of UV stabilisers used in plastics

Not all UV stabilisers are the same. Different chemical classes offer different absorption ranges, thermal…

Lire la suite

What is the difference between UV absorbers and light stabilisers?

Both UV absorbers and light stabilisers protect plastics from UV-induced degradation. They are often used…

Lire la suite

Which plastics benefit most from UV stabilisers and light stabilisers?

UV degradation affects almost all plastics, but some are far more susceptible than others. The…

Lire la suite

Preventing yellowing in water-based polyurethane coatings

Water-based polyurethane coatings are used in automotive finishing, wood coatings, industrial coatings and decorative applications….

Lire la suite

Why polyurethane yellows and how to prevent it

Polyurethane is used in a wide range of products: mattresses, sofas, automotive seats, insulation materials…

Lire la suite

How to choose the right UV absorber for your polymer

Not all UV absorbers work equally well in all polymers. Choosing the wrong one can…

Lire la suite

Which industries rely on UV absorbers for plastics?

UV absorbers are not a niche additive. They are used in a wide range of…

Lire la suite

How UV radiation damages plastics and how UV absorbers prevent it

Plastics are used in thousands of products that spend time outdoors or near windows. Car…

Lire la suite

What is a pharmaceutical intermediate and how is PCCA used in production?

Most medicines contain an active pharmaceutical ingredient, or API. That API does not appear out…

Lire la suite

What is pentoxyverine and what role does PCCA play in its synthesis?

Pentoxyverine is a non-opioid cough suppressant used in the treatment of dry cough caused by…

Lire la suite

How to Protect High-Performance PPA from Light and Thermal Degradation

Polyphthalamide (PPA) is a semi-crystalline thermoplastic aromatic polyamide, commonly known as aromatic high-temperature nylon. It…

Lire la suite

CVD, PVD and ink-based coating: what is the difference?

Hard, functional coatings are applied in several ways. The method you choose depends on the…

Lire la suite

Lanthanum hexaboride (LaB₆) as an infrared absorber

Lanthanum hexaboride (LaB₆) is a rare earth metal boride with a distinctive purple to violet…

Lire la suite

UV Green 018 vs UV Green 007

Differences in UV absorption and performance The main function of UV absorbers is to protect…

Lire la suite

UV stabilizer for plastic

Protecting your materials from sunlight? ​​Plastics are widely used in products that spend time outdoors….

Lire la suite

Empowering Polyolefin Materials for Long-Lasting Weatherability

Polyolefin is an important polymer material widely used across industrial sectors. It features excellent physical…

Lire la suite

Powder coating; how to improve weather resistance

Powder coating is a type of coating composed of resin, pigments, fillers, and various additives,…

Lire la suite

Omnistab UV P is a broad spectrum UV absorber for PVC

Omnistab UV P is a cost-effective, broad-spectrum UV absorber that provides excellent protection in the…

Lire la suite

What’s the secret to lighter, more durable Robots

As Tesla’s Optimus, Figure 01, Walker S1, and other humanoid robots accelerate toward commercial deployment,…

Lire la suite

K fair

We will be exhibiting at the upcoming K-fair. The K-fair is being held at the Messe…

Lire la suite

We’ve moved!

We’re excited to share that we’ve officially moved to our new office! You can now…

Lire la suite

Improve the quality and anti-yellowing properties of TPU Shoe elastomers

Thermoplastic polyurethane (TPU) combines the elasticity of rubber with the processing efficiency of plastic. Known…

Lire la suite

High-temperature resistant and anti-yellowing agents for light-colored plastics

Light-colored plastic products are prone to yellowing and discoloration during production, processing, and everyday use….

Lire la suite

European Coating Show 2025

We will be exhibiting at the upcoming European Coating Show (ECS). The ECS is being held…

Lire la suite

Additives for Rubber Sealants

What’s a Rubber Sealant? A rubber sealant is a type of sealing material made primarily…

Lire la suite

High quality water-based PU Coatings

Automotive coatings are developing towards environmental protection while also enhancing the appearance and decorative effect…

Lire la suite

Chinacoat 2024

We will be exhibiting at the upcoming Chinacoat. The Chinacoat is being held in China…

Lire la suite

Triazine UV absorbers are efficient alternatives

The primary external concern about benzotriazoles is that they may act as endocrine disruptors. Benzotriazole…

Lire la suite

How to obtain high quality PU artificial leather?

PU artificial leather has become an increasingly popular alternative to natural leather due to its…

Lire la suite

Compounding World Expo 2024

We will be exhibiting at the upcoming Compounding World Expo. The Compounding World Expo is being…

Lire la suite

How to get high quality transparant PC?

Polycarbonate (PC) is a comprehensive engineering plastic known for its good performance, often referred to…

Lire la suite

Catalyst for organic reactions; PALLADIUM(II) ACETATE

We have recently started with the development and production of PALLADIUM(II) ACETATE – CAS NO….

Lire la suite

Automotive Nylon Engineering Plastic Modification

Nylon engineering plastics (abbreviated as PA) refer to thermoplastic resins in which the main chain…

Lire la suite

Chinaplas 2024

We will be exhibiting at the upcoming Chinaplas. The Chinaplas is being held in National Exhibition…

Lire la suite

How to obtain ABS Resin with excellent weatherability

Acrylonitrile-butadiene-styrene (ABS) copolymer combines the rigidity of acrylonitrile, the toughness of butadiene, and the processing…

Lire la suite

We have exciting new developments!

We are introducing a greener alternative for our products. Last year we’ve been working in…

Lire la suite

New year, new logo

2005 – A strong connecting hub was needed to connect customer and producer. 2007 –…

Lire la suite

How to improve the UV resistance of PVC resin? – Omnistab UV 312

Introduction When it comes to enhancing the UV resistance of PVC resin, Omnistab UV 312…

Lire la suite

How to improve the durability of TPU

Introduction TPU is an abbreviation for Thermoplastic Urethane. It is a polymer material made by…

Lire la suite

UV absorber for transparant polyester

For transparant polyester requiring wide-spectrum UV absorption, Omnistab UV 3638 is your solution. Polyester polymers…

Lire la suite

Excellent antioxidant against NOx fumigation yellowing

Omnistab AN 9142 is an excellent antioxidant against yellowing caused by NOx fumigation. It effectively…

Lire la suite

Merry Christmas & a Happy New Year!

On behalf of our team we wish you happy holidays, all the best to you in…

Lire la suite

High molecular weight HALS

As polymer applications continue to expand, low molecular weight Hindered Amine Light Stabilizers (HALS) often…

Lire la suite

Omnistab Benzophenone UV absorbers

We have different Omnistab Benzophenone UV absorbers in our portfolio. These UV absorbers have a…

Lire la suite

Liquid Benzotriazole UV absorbers

Liquid Benzotriazole UV absorbers solve the challenges of high-end coatings. Under outdoor conditions, some coatings…

Lire la suite

Improve the thermal stability of silicone adhesives

In this article we will introduce our Omnistab additives, which improve the thermal stability of…

Lire la suite

UV resistance solutions for plastics

To efficiently protect plastics from degradation we offer UV resistance solutions for plastics. In order…

Lire la suite

Solution to aging of Photovoltaic (PV)

Global energy is accelerating the transition to an efficient, clean and sustainable direction. The development…

Lire la suite

How to obtain high quality PU foam products?

There are two types of polyurethane (PU) foam; soft foam and rigid (hard) foam. Soft…

Lire la suite

Chinaplas 2023

We will be exhibiting at the upcoming Chinaplas. The Chinaplas is being held in Shenzhen…

Lire la suite

How to maintain the high performance of coatings?

To be able to answer the question how to maintain the high performance of coatings,…

Lire la suite

European Coating Show 2023

We will be exhibiting at the upcoming European Coating Show (ECS). The ECS is being…

Lire la suite

Polyamide engineering plastic

Polyamide (abbreviated PA), commonly known as nylon, is the common name of the thermoplastic resin…

Lire la suite

Polyurethane Sealants

Polyurethane sealants are composed of polyurethane rubbers and polyurethane prepolymers. Such sealants have high tensile…

Lire la suite

Happy holidays

On behalf of our team: we wish you happy Holidays, all the best to you…

Lire la suite

Expectations for early 2023

We as Partners in Chemicals want to ensure that we can serve our customers on…

Lire la suite

Better weather resistance of polypropylene fabric

Polypropylene (PP) fiber is a synthetic fiber spun from isotactic polypropylene, which is polymerized by…

Lire la suite

Dubai branch office management buy-out

Since 2014 Partners in Chemicals is, under the name of ICG Specialty ChemicalsFZCO, operational in…

Lire la suite

Thank you for visiting us!

Thank you for visiting us during Plasteurasia 2022 at the booth of our partner Etkin…

Lire la suite

Hindered phenolic antioxidants for protection of polymers

Hindered phenolic antioxidants are compounds that have substituents on one or both sides of the…

Lire la suite

K fair 2022 in Düsseldorf 

We will be exhibiting at the upcoming K fair in Düsseldorf for the 5th time…

Lire la suite

Thermoset plastics – how to improve its durability and color stability?

Thermoset plastics, with thermosetting resin as the main component. It is a plastic that forms…

Lire la suite

How to obtain better performance with Polyurethane adhesives?

Polyurethane (PU) adhesives are adhesives that contains -NHCOO- and/or isocyanate group (-NCO-) in the molecular…

Lire la suite

Modified plastic in lightweight cars

In recent years, the development of the automotive industry revolves around lightweight, environmental protection and…

Lire la suite

How to alleviate polyurethane yellowing?

In this article we will explain how to alleviate polyurethane yellowing. Polyurethane products are widely…

Lire la suite

Making high-end textiles UV-resistant

UV-resistant treatment is an essential part of the functional textile finish for making high-end textiles…

Lire la suite

Silicone adhesives

The silicone adhesives used in the early days came from natural materials. For instance, animal…

Lire la suite

Optical Brighteners

Optical Brighteners are additives to mask the inherent yellowness and improve colors and make your…

Lire la suite

Water-based sustainable paint

As people’s awareness of health and environmental protection is gradually improving, water-based sustainable paint is…

Lire la suite

Omnistab Benzotriazole UV absorbers

Omnistab Benzotriazole UV absorbers have exceptionally strong and broad UV absorption properties throughout the UV…

Lire la suite

Limit electricity for carbon reduction

The Chinese government has decided to limit electricity for carbon reduction. China is aiming to…

Lire la suite

Excellent hydrolysis resistance phosphite antioxidant

Do you choose the right antioxidant to increase the heat aging resistance of materials? The…

Lire la suite

Plastics with UV absorbers, a “Protective umbrella”

Almost all plastics that are exposed to sunlight or other outdoor weather conditions require protection….

Lire la suite

Efficient liquid UV absorber

The Omnistab UV 1 is an efficient liquid UV absorber, which can absorb ultraviolet light…

Lire la suite

Nucleating agent for polyamide

In this article, we will take a closer look at a nucleating agent for polyamideThe…

Lire la suite

Omnistab series for automotive coatings

Automotive coating is one of the fastest developing coatings worldwide. New products are usually better…

Lire la suite

UV Filter Sunscreen

Meteorologically, it is still winter in the Northern Hemisphere. However, the first rays of the…

Lire la suite

What do you know about Powder coating?

What is powder coating? It is quite simple, but we would like to explain it…

Lire la suite

Adhesives and Sealants protective products

Adhesives and sealants are essential products in many industries. Their applications range from paper, packaging,…

Lire la suite

The world of fiber applications

What are fiber applications? Today, more than half of all fiber consumed is synthetic. For example,…

Lire la suite

« Gorgeous modification » of Benzotriazole UV absorber

Omnistab UV 360 is a very efficient benzotriazole UV absorber. It has good UV absorption…

Lire la suite

Expectations early 2021

This year was different from other years and a huge challenge for everyone. Working differently…

Lire la suite

New product groups

New product groups coming soon! We are continuously working on our product portfolio to serve…

Lire la suite

Today’s highlight is a triazine UV absorber

A triazine UV absorber has excellent properties. In addition, the dosage you need to put…

Lire la suite

Antioxidant for long-term thermal stabilization

Looking for an antioxidant for long-term thermal stabilization? You probably need an asymmetric hindered phenol…

Lire la suite

UV Absorber used in a wide wavelength spectrum

In this article we will explain more about the UV absorber used in a wide…

Lire la suite

Temperature resistant anti oxidant

An excellent temperature resistant anti oxidant is the Omnistab AN 80. The organic combination of…

Lire la suite

PP Fibers

Looking for more stability of your polypropylene fibers (PP fibers)? Our Omnistab LS 119 is…

Lire la suite

PE wax

In this article we will explain the characteristics and features of polyethylene wax (PE wax)….

Lire la suite

Evaluation of new light stabilizers

Choosing your product among all available light stabilizers in the market is challenging. Based on…

Lire la suite

Light stabilizer 2020

As of June 2020, we expand our product range with the development of, ironically, Light…

Lire la suite